Public space parameters – Proxim ORiNOCO AP-2500 User Manual
Page 118
118
Public Space Parameters
Figure 5-11 AP Communicating with Hotspot Aggregator
The following steps describe how you should configure the AP-2500 if you are partnered with a hotspot aggregator:
1. Follow the installation steps described in
and
Internal Authentication with RADIUS
.
•
Configure the RADIUS Authentication and Accounting settings as required by your hotspot aggregator.
— In general, the aggregator should supply you with the settings of a RADIUS server on the Internet that
performs AAA functions for the aggregator’s subscribers.
2. Click PublicSpace > AAA > Internal to update the AAA Internal Web Server options so they match the following
settings (if necessary):
•
Place a check mark in the Enable SSL box and enter the Certificate DNS Name (this is optional but
recommended to provide subscribers with a secure login).
— If using SSL, you must download keys to the AP first. See
.
•
Place a check mark in the Enable Portal Page box and enter the page’s location in the Portal Page URL field
if you want to provide a custom login page to subscribers.
— See
.
— You must also enter the portal page address in the
table.
•
Place a check mark in the Enable Smart Client box.
•
Place a check mark in the Enable User Names box.
•
Remove the check mark from the Enable New Subscribers box (that is, disable support for new subscribers).
•
Remove the check mark from the Enable Credit Card Services box (that is, disable credit card services).