Pitney Bowes J640 - Manual (Page 141)

Defining the Batch Control Field––––––––––––––––––––––––––––––
The batch control field defines the print job and applies only to
the batch that immediately follows. The Batch Header must
precede this field.
Example {E,0,1,4,2,0,0
p
Syntax {E,feed_mode,batch_sep,print_mult,
multi_part,cut_type,cut_mult
p
E1. E Defines the data stream as a Batch Control Field.
E2. feed_mode Type of feed mode. Options:
0 Continuous Feed
1 On-Demand
E3. batch_sep Type of batch separator. Options:
0 Does not print a separator
1 Prints a separator
E4. print_mult Number of tags with the same image.
1 to 999
E5. multi_part Number of identical parts on one tag.
1 to 5
E6. cut_type 0 is the only valid option.
E7. cut_mult 0 is the only valid option.
J640 Programmer’s Manual
7-26