Pitney Bowes J640 - Manual (Page 103)

n
✦ If you use the COPY command to download your formats,
set "Flow Control" to DTR (not XON/XOFF).
✦ Always make sure the communications values at the host
match the values on your printer, or you will not be able to
print formats.
Example {I,F,3,1,0,0,1
p
}
This record would
✦ identify the communication settings record.
✦ use a baud rate of 9600.
✦ use a word length of 8 bits.
✦ use a 1-stop bit.
✦ not use a parity bit.
✦ use the DTR mode.
Co
nf
igu
ring
t
h
e P
rin
te
r
Chapter 5. Configuring the Printer
5-17