Lanier AP2610 User Manual

Page 91

Removing Misfed Paper

CCCC

Open the front cover by pushing
the front cover release button,
and then close it to reset the mis-
feed condition.

Note

❒ You can apply this procedure

for both the paper tray and the
optional Paper Feed Unit.

❒ To reset the misfeed condition,

open and close the front cover,
then the indicator will be off.

When "Remove Misfeed
Internal Path/Open Front
Cover" Appears

Important

❒ Forcefully removing misfed paper

may cause paper to tear and leave
scraps of paper in the printer. This
might cause a misfeed and damage
the printer.

AAAA

Open the front cover by pushing
the front cover release button.

BBBB

While lifting the front side of the
toner cartridge, pull it out of the
printer.

Important

❒ Be sure to put the toner car-

tridge on a stable, flat surface.

❒ Do not hold the toner cartridge

upside down or stand it verti-
cally.

CCCC

Pull out the misfed paper by
holding both sides of paper. Be
careful not to get toner dust on
your hands or clothes.

ZGDY300J

ZCEH120J

ZGDT110J

ZGDY520J