Lanier AP2610 - Manual (Page 80)

Troubleshooting
72
5
Replace Maintenance Kit It is time to replace parts in-
cluded in the Maintenance
Kit. Replace parts. See p.144
“MAINTENANCE KIT Type
2600”.
Shift Tray Error An error has occurred in the 1-
bin Shift Sort Tray. First, turn the power switch
off and then on. If the message
appears again, call your sales
or service representative.
Size Media Mismatch The paper size setting of the
tray differs from that of actual
paper type in the tray. Load paper of the indicated
paper size and type into the
paper tray being used. See
p.25 “Paper and Other Media
Supported by This Printer”.
Size Mismatch The paper size setting of the
tray differs from that of actual
paper type in the tray. Load paper of the indicated
paper size and type into the
paper tray being used. See
p.25 “Paper and Other Media
Supported by This Printer”.
USB I/F Error An error has occurred in the
USB interface. First, turn the power switch
off and then on. If the message
appears again, call your sales
or service representative.
Warming Up/Adjusting... The printer is warming up or
toner is being supplied. Wait until the panel display
change the "Ready".
Messages Description Comments