beautypg.com

Lanier 5711 User Manual

Material safety data sheet

background image

Lanier Worldwide, Inc.

2300 Parklake Dr., N. E.

Atlanta, GA 30345-2979

Emergency Telephone: (800) 526-4371

MATERIAL SAFETY DATA SHEET

Section 1: Chemical Product and Company Information

Identity:

Cyan Toner for 5711 / 5811

MSDS No.

CP- 325

Product ID:

117-0310

Issued:

9/2/99

Synonyms
& Common
Names:

Uses:

Chemical
Formula:

Cyan Toner for
Lanier 5711, 5811

Lanier 5711, 5811 Color Copier

Mixture

Supersedes:

Date:

Prepared by:

Approved by:

European Contact:

None
9/2/99
Lanier QA/EH&S Department 770-493-2361
Larry Choskey, Sr. Quality Assurance Engineer
Lanier Worldwide, WSM Europe,
Walter Fricke,
Im Taubental D-41468 Neuss, Germany
+49-2131-387-177

Section 2: Composition / Information on Ingredients

PERCENT

CAS No.

EXPOSURE LIMITS

SOURCE

Polyester resin

85 – 95 % by weight

N/a

N/a

N/a

Pigment

1 – 5 % by weight

N/a

N/a

N/a

*PEL as the product: 15mg/m

3

(total dust), 5mg/m

3

(respirable dust)

*TLV as the product: 10mg/m

3

(total dust), 5mg/m

3

(respirable dust)

Section 3: Hazards Identification

HMIS Rating:
FLAMMABILITY = 1 HEALTH = 1
REACTIVITY = 0 SPECIAL = none

Health Hazards (Acute, Chronic, Immediate and Potential): Minimum irritation to respiratory tract may occur as with exposure to any non-toxic dust.
Inhalation should be avoided. May cause temporary eye discomfort.
Health Hazards of Long Term exposure (Chronic): Not known.

Section 4: First Aid Measures

Inhalation:

Remove to fresh air if effects occur. Gargle with water.
Get medical attention if needed.

Eye Contact:

In case of contact, immediately flush eyes with
water for 15 minutes. Get medical attention if
needed.

Skin Contact:

Wash with soap and water.

Ingestion:

Dilute stomach contents with several glasses of
water. Get medical attention if needed.

Section 5: Fire Fighting Measures

Suitable extinguishing media: CO

2

, dry chemical, foam or water.

Extinguishing media which may not be used for safety reasons: none

Unusual Fire and Explosion Hazards: Toner material, like most
organic material in powdered form, is capable of creating a dust
explosion.

Flammability: Non-flammable solid The decomposition products are CO, CO

2

,. Avoid inhalation of smoke.

Special protective equipment for fire fighters: none
UEL: n/a LEL: n/a

Section 6: Accidental Release Measures

Spill / leak Procedures: If spilled, sweep up using an approved toner vacuum with a 0.5 micron filter or smaller, such as the Atrix AAA Toner Vacuum or
3M Toner Vacuum. Use of a vacuum cleaner not rated for toner particles, could result in a fire or personal injury. Remove residue with soap and cold
water.
Miscellaneous: Keep product out of sewers and watercourses.
Personal protection: Avoid inhalation of dust.

Section 7: Handling and Storage

Special Handling:

Cleanse skin after contact before breaks or meals, and end of workday.

Special Storage:

Miscellaneous:

Store in a cool, dry place. Avoid direct sunlight. Keep out of reach of children. Keep from contact with oxidizing materials.
Do not handle in windy areas. Flying powder may enter eyes. Minimize inhalation of dust. Cleanse skin thoroughly after
contact, before breaks and meals, and at end of work periods.

Section 8: Exposure Control and Personal Protection Information:

Respiratory Protection: none required under normal use. Hand Protection: none required under normal use.

This manual is related to the following products: