Lanier AP2610 User Manual

Page 78

Troubleshooting

NVRAM Error

An error has occurred in the
printer.

First, turn the power switch
off and then on. If the message
appears again, call your sales
or service representative.

Error: IEEE 1394 Board

An error has occurred in the
optional 1394 Interface Unit.

First, turn the power switch
off and then on. If the message
appears again, call your sales
or service representative.

Error: Memory Switch

An error has occurred in
printer.

First, turn the power switch
off and then on. If the message
appears again, call your sales
or service representative.

Error: Optional RAM

An error has occurred in the
optional Memory Unit.

First, turn the power switch
off and then on. If the message
appears again, call your sales
or service representative.

Error: Parallel I/F Board

An error has occurred in the
parallel interface board.

First, turn the power switch
off and then on. If the message
appears again, call your sales
or service representative.

Full: Mailbox Tray 1

The output tray 1 of the op-
tional Mailbox is full.

Remove paper from the out-
put tray 1 of the optional Mail-
box.

Full: Mailbox Tray 2

The output Tray 2 of the op-
tional Mailbox is full.

Remove paper from the out-
put Tray 2 of the optional
Mailbox.

Full: Mailbox Tray 3

The output Tray 3 of the op-
tional Mailbox is full.

Remove paper from the out-
put Tray 3 of the optional
Mailbox.

Full: Mailbox Tray 4

The output tray 4 of the op-
tional Mailbox is full.

Remove paper from the out-
put tray 4 of the optional Mail-
box.

Full: Output Tray(s)

All output trays are full.

Remove paper from all output
trays.

Full: Standard Output Tray

The output tray is full.

Remove paper from output
trays.

Full: Waste Toner

The toner is almost run out.

Prepare a new toner cartridge.

Low: Toner

The toner cartridge is not set
correctly or toner is almost
running out.

Set the toner cartridge correct-
ly.

Mismatch: Paper Size

The paper size setting of the
tray differs from that of actual
paper size in the tray.

Load paper of the indicated
paper size into the paper tray
being used. See p.25 “Paper
and Other Media Supported
by This Printer”.

Messages

Description

Comments