Lanier AP2610 - Manual (Page 171)

Specifications
163
7
❖ ❖ ❖ ❖ Allowed cable hops in a bus:
Maximum 16
❖ ❖ ❖ ❖ Power supply:
Nonpower supply
Cable Power repeated (IEEE 1394a-2000 compliant)
802.11b Interface Unit TypeA (R-WL11)
❖ ❖ ❖ ❖ Transmission Spec.:
Based on IEEE 802.11b (Wireless LAN)
❖ ❖ ❖ ❖ Protocol:
TCP/IP, NetBEUI, IPX/SPX, AppleTalk
Note
❒ SmartNetMonitor and WebStatusMonitor are supported.
❖ ❖ ❖ ❖ Data Transfer Speed:
Auto select from below speed
1Mbps, 2Mbps, 5.5Mbps, 11Mbps
❖ ❖ ❖ ❖ Frequency Range:
• Inch version:
2412-2464 Mhz (1-11 channels)
• Metric version:
2412-2472 Mhz (1-13 channels)
❖ ❖ ❖ ❖ Transmittable Distance:
1Mbps 400m *1
2Mbps 270m *1
5.5Mbps 200m *1
11Mbps 140m *1
*1 These figures are a guideline for outdoor use. In general, the transmittable dis-
tance indoors is 10-100 m, depending on the environment.
❖ ❖ ❖ ❖ Transmission Mode:
ad hoc mode and infrastructure mode