Lanier AP2610 User Manual
Page 124
Making Printer Settings with the Control Panel
116
6
*1
While the printer is Online, press
{{{{Enter #}}}}, and then press {{{{Escape}}}}. Finally, press
{{{{Menu}}}}. You can access the "Menu Protect", “Series Prnt.Job” and “Ppr. Size Error”
menu on the panel display.
WL. LAN Signal
You can check the signal strength when using the wireless LAN.
Reference
For more information about displaying the signal strength, see
p.120 “Displaying the Signal Strength”.
WL. LAN Defaults
You can reset the wireless LAN settings to the default.
Key Repeat
You can scroll through the menu by holding this key down.
Note
❒ Default: On
This procedure lets you protect menu settings against accidental
changes. It makes it impossible to change the menu settings you
make with the normal procedure unless you perform the required
key operation. In a network environment, protecting settings re-
stricts who can change menu settings to network administrators.
• Level 1
• Level 2
• Off
Series Prnt.Job
You can print series of print jobs without time intervals between
them when jobs are sent from the same computer, PDL, and inter-
face.
Note
❒ Default: On
❒ When the Job Reset key is pressed, all jobs sent to the machine
will be canceled.
Ppr.Size Error
You can select whether to have an error report printed when the
paper size setting for the tray differs from the actual size of the pa-
per in the tray. You can also select whether to have an error mes-
sage displayed when feeding paper from the tray.
Note
❒ Default: Do not detect
❒ When it is "Detect", it prints with the paper size that was set
when the error message appeared.
Menu
Description