Locked print, Printing a locked print file, 4locked print – Lanier AP2610 User Manual
Page 64
Sample Print/Locked Print
56
4
Locked Print
Use this function to maintain privacy
when printing confidential docu-
ments. Documents will not be printed
out automatically, unless a password
is entered, using the control panel af-
ter sending the print job.
Important
❒ Turning the printer off deletes any
documents or error logs stored on
the optional hard disk drive.
Limitation
❒ To use this function, the optional
Hard Disk Drive must be installed
on the printer.
Note
❒ If the application has a collate op-
tion, confirm that it is not selected
before sending a print job. By de-
fault, locked print jobs are auto-
matically collated by the printer
driver. If the collate option is se-
lected from the application print
dialog box, more pages than in-
tended may be printed.
❒ You can identify the file you want
to print by the User ID and the
time when the job was stored.
❒ The actual number of pages the
printer can save depends on the
contents of the print images. For
example, the printer can save up to
30 jobs or 1,000 pages. It depends
on the data volume.
❒ After the locked print file is print-
ed, the job in the printer is deleted
automatically.
Printing a Locked Print File
The following procedure describes
how to print a locked print file with
the PCL printer driver. For informa-
tion about how to print a locked print
file with the PostScript printer driver,
see the PostScript 3 Operating In-
structions Supplement included on
the CD-ROM. For more information
about RPCS printer driver, see Help.
AAAA
From an application, select the
menu command to print.
The print dialog box appears.
BBBB
Open the Printer Properties.
CCCC
From the [Job Type:] box on the
[Setup]
tab, select [Locked Print].
DDDD
Click the [Details:] button.
EEEE
In the [User ID:] box, type a User ID
of up to eight alphanumeric char-
acters.
Note
❒ This is used to identify the user
associated with a job.
❒ The User ID can consist of up to
eight alphanumeric (a-z, A-Z, 0-
9) characters.
FFFF
In the [Password:] box, type a pass-
word of four digits.
Note
❒ The password must be four dig-
its (0-9).
GGGG
Click [OK].
HHHH
After making all desired settings,
click [OK].