Lanier AP2610 - Manual (Page 105)

Cleaning and Adjusting the Printer
97
5
EEEE
Holding the grips of the toner car-
tridge, insert it into the printer
until it stops.
FFFF
Push down the toner cartridge to
settle it in appropriate position.
GGGG
Close the front cover.
Important
❒ Carefully close the front cover.
If you cannot close the cover
easily, pull the toner cartridge
out of the printer and insert it
again. After that, close the front
cover again.
HHHH
Turn on the power switch.
Adjusting the Image Density
You can adjust the image density
when the print side of the page is a
shaded or print image is too light.
Important
❒ Extreme settings may create print-
outs that appear dirty.
❒ Image density settings should be
made from the application or the
printer driver whenever possible.
AAAA
Press
{{{{Menu}}}}.
"Menu" appears on the panel dis-
play.
BBBB
Press
{{{{U U U U}}}} or {{{{T T T T}}}} to display the
"Maintenance" menu, and then
press
{{{{Enter #}}}}.
The following message appears on
the panel display.
ZGDT120J
ZGDT140J
ZGDH130J
Maintenance:
Image Density
Enter Form Feed
Job Reset
On Line
Escape
Menu
Power Error Data In
Enter Form Feed
Job Reset
On Line
Escape
Menu
Power Error Data In