Lanier AP2610 - Manual (Page 141)

Host Interface Menu
133
6
IEEE 1394 Setup *1 You can make settings for using IEEE 1394. This menu appears
only when the optional IEEE 1394 board is installed.
❖ ❖ ❖ ❖ IP Address1394
You can set the IP address for IEEE 1394 (IP over 1394).
Note
❒ Default: All zero
❖ ❖ ❖ ❖ Subnet Mask1394
You can set the Subnet Mask for IEEE 1394 (IP over 1394).
Note
❒ Default: All zero
❖ ❖ ❖ ❖ IP over 1394
You can activate IP over 1394.
Note
❒ Default: Active
❖ ❖ ❖ ❖ SCSI print
You can activate SCSI print.
Note
❒ Default: Activate
❖ ❖ ❖ ❖ Bidi-SCSI print
You can activate bidirectional transmission for SCSI print.
Note
❒ Default: Activate
Menu Description