Lanier AP2610 - Manual (Page 123)

Maintenance Menu
115
6
Maintenance Menu Parameters
Menu Description
Image Density You can select the print image density.
-3 to 3
Reference
For more information, see p.97 “Adjusting the Image Densi-
ty”.
Registration
❖ ❖ ❖ ❖ Prt. Test Sheet
You can print the registration test sheet.
Tray 1, Tray 2, Tray 3, Bypass Tray, Duplex backside
Note
❒ Default : Tray 1
❒ Only the installed trays appear on the panel display.
❖ ❖ ❖ ❖ Adjustment
You can select the start position for printing on a page.
Horiz.: Tray 1, Horiz.: Tray 2, Horiz.: Tray 3, Horiz.: Bypass,
Horiz.: Dup.Back, Vert.: All Trays, Vert.: Dup.Back
-4 to 4
Note
❒ Default : Horiz.: Tray 1
❒ The registration value is not a default.
❒ Only the installed trays appear on the panel display.
Reference
For more information, see p.98 “Adjusting the Registration
of the Trays”.
Curl Prevention You can control the fuser temperature to prevent paper from curl-
ing.
Note
❒ Default: Off
❒ Use this mode only when paper misfeed occurs frequently
during duplex printing.
ROM Update This menu is not currently used.
HDD Format After installing the Hard Disk Drive, format it.
Note
❒ This menu appears only when the optional Hard Disk Drive is
installed.
Reference
For more information about formatting the Hard Disk Drive,
see p.119 “Formatting Hard Disk Drive Type 2600”.