Editing the channel list – Kathrein UFS 922 si User Manual
Page 79
79
If several channels use the same
data, the following warning message is
displayed when you deactivate the function
(see screenshot on right). In this case, no
data is stored for the other affected
channels.
You can only use this function if Premium
EPG
data is available for the selected channel.
Use the
buttons to select “tvtv off” or “tvtv on”.
Depending on whether Premium
EPG support is
activated or deactivated, you can now set the support to
“on” or “off” by confirming with the
button.
Support not activated
Support activated
Make this setting for your desired channels. For better orientation, you can display a channel list in the “Complete
list/Satellite lists” category (green), which includes only those channels supported by Premium
EPG.
The
list in the category “Satellite lists” is selected using the
buttons.
This setting can be changed at any time you like.
Start block selection
Use the
buttons to select “Start Blockselection”
and confirm your selection with the
button. You
can now use the
buttons to start block selection
at the previously selected channel. This selects the
channels in the sequence in which they appear in the
previously selected channel list and applies a coloured
background to them (see example screenshot on
the right):
Then press the
(red dot) button. You can now carry
out all the editing options for the selected channels
as when an individual channel is selected (apart from
the “tvtv off/on” function). Select the desired action
(“Move”, “Delete”, “Skip”, “Lock” or “To Favorite”), using
the
buttons, and confirm your selection with the
button. You can find an explanation of the individual
edit options under “Editing channels (channel lists)”
in this chapter.
Editing the channel list
Channels for which support is activated can be recognised
by the following logo, which appears after the name
of the broadcaster. Channels for which support is not
activated can be recognised by the crossed out logo (see
screenshots above).
For example: If you deactivate support for RTL CH, no
more data is loaded for RTL and RTL Austria either.