Kathrein UFS 922 si - Manual (Page 36)

6
Refer to the documentation supplied with the UAS 481 for the settings for “Tuner 1” and “Tuner 2”.
No frequency can be used by more than one receiver. The receivers would interfere with each other.
Do not assign the same frequencies/channels to tuner 1 and tuner 2.
Connection and setup
The individual items are selected using the

buttons. If you require to access submenus, they can be called up
using the

button. Changes to the current settings can be made using the

buttons or the numeric keypad.
Press the

(green) button.
The following display appears:
Select Satellites - Tuner 1
Here, you can select the satellite included in the signal
on tuner 1. Use the

buttons to select the satellite you
want and confirm your selection with the

button.
When you have selected the satellite you want, press the

(green) button.
The individual items are selected using the

buttons.
Changes to the current settings can be made using
the

buttons or the numeric keypad.
The following display appears:
OneCable System - UAS 481