Kathrein UFS 922 si - Manual (Page 106)

106
Main menu - Service menu
If new software or changes to the channel list are found, you will see the following display the next time you start the
UFS 922:
Press the

button to perform the software update.
After the software update, you will see the following
display (only if there are any changes to the delta
channel list):
Press the

button to perform the channel list update or
the

button if you do not want to update your channel
list.
The channel list is not overwritten!
The receiver saves the new data and then restarts.
Do not switch off the receiver during this
process; wait until the automatic restart
has been completed. Otherwise, the
software on the unit could be damaged!
After the restart, the update is complete.