Kathrein UFS 922 si - Manual (Page 32)

Use the

buttons to select “On” in the “OneCable
System used” line.
Then use the

buttons to switch to the “OneCable
System” field.
The following display appears:
Use the

buttons to select the one cable system used in your reception system:
- EXR ... / EXU ... For all Kathrein one cable matrices
- UAS 481 For the Kathrein one cable LNB UAS 481
- User-defined For all one cable systems not covered by either of the above specifications
Continue as described in the first installation for the type of one cable reception
you selected.
Connection and setup
OneCable System