Tuner configuration – Kathrein UFS 922 si User Manual
Page 155
155
The following display appears:
Satellite and position:
Select here the satellite you desire from the available
satellites. By pressing the
button at this point you
can view a list of the satellites saved in the receiver.
Use the
buttons to select the satellite you want
and confirm your selection with the
button.
Use the
buttons to select “Satellite 1: ****” and press the
button.
Test-Transponder:
Select the “Test Transponder” field. Here you can select a transponder for checking the signal strength bar and
signal quality bar to see whether your settings are correct.
If no connection can be established to the one cable system, check your settings (transmission channel and frequency)
and if necessary call for expert help.
When all settings have been made, press the
button to exit the menu.
Tuner Configuration
The following display appears: