Kathrein UFS 922 si - Manual (Page 49)

49
Basic operation in TV or Radio mode (live operation)
Switching between TV and Radio operation
Adjusting the volume
Channel selection
Channel selection from the channel list
To switch between TV and radio mode, press the

(blue) button.
The volume is adjusted using the

buttons.
The

button allows the channel to be selected from the ordered version of the currently selected channel list/favourites
list. If the channel slot in the channel list is known, the desired channel can also be called up directly by inputting
the channel slot, using the numeric keypad on the remote control (example: ASTRA HD+ is at channel slot 10 in the
currently selected channel list - to call it up, successively press the
1
buttons on the remote control).
Direct channel selection
Press the

button to open the channel list. The following display appears:
Currently selected
channel list Live picture from
selected channel
Signal
strength
and quality
Channel list
Editing the TV list
(see “Editing
the channel
list” chapter)
Channel data:
- Transmitting satellite
- Transponder frequency
- Polarization
- Symbol rate
Currently
selected channel
Call up alphabetic
sorting
(

yellow button)
Call up the
favourites lists
(

red button)
Call up the search
function
(

button) can
be called up from
any channel list
Call up the
complete list/
satellites list
(

green button)
Information on selecting favourites lists:
You can also call up the favourites lists directly from TV screen, using the

(red) button. Then use the cursor buttons (

)
to select the desired favourites list and confirm your selection using the

button. The receiver automatically selects the
first channel saved in the favourites list and returns to the TV screen. You can now select the sequence of channels saved
in the selected favourites list, using the

buttons.