Kathrein UFS 922 si - Manual (Page 141)

141
DiSEqC™1.1
The individual items are selected using the

buttons. If you require to access submenus, they can be called up
using the

button. Changes to the current settings can be made using the

buttons or the numeric keypad.
Tuner 1
Select “Tuner 1” field and press the

button to allow
you to make the settings for the first tuner.
Tuner Configuration
The following display appears:
Number of Satellites
Make the settings for the satellites (up to 64 satellites)
here. Select the satellite position (1-64) (in the example
on the right, the “ASTRA 19.2° East” satellite has been
selected in the first position).
Satellite 1
Select “Satellite 1:***” field and press the

button
to allow you to make the settings/selection for the first
satellite.
The following display appears:
Satellite and position:
Select the “Satellite and Position” field. Select here
the satellite you desire from the available satellites. By
pressing the

button at this point you can view a list of
the satellites saved in the receiver. Use the

buttons
to select the satellite you want and confirm your selection
with the

button.
Uncommitted Switch:
Select the “Uncommitted Switch” field. Set the “Uncommitted Switches” here to match the configuration of your
reception system. You can select “Deactivated” or a value from “1” to “16” in single unit increments.