Kathrein UFS 922 si - Manual (Page 114)

114
Clock Change (Summer Time)
Here you can select whether the receiver should automatically change over to and from summer and winter time. The
“Manual” setting only makes sense if you also selected “Manual” for the selection item “Time setup”, since otherwise
the time information is obtained automatically by the receiver. Either
- Automatic or
- Manual
Time Setup Channel (only works if the time setup is set to “Automatic”)
Here you can select the channel from which the receiver should obtain the time information. Press the

button to call
up a channel list from which you can select the channel you want using the cursor (

) buttons. Confirm your selection
with the

button.
Setup Time Now
Press the

button. Depending on the desired time setting (Automatic/Manual) the following display then appears:
Automatic Manual
You need not perform any further input, the receiver will
automatically update the date and time.
Use the numeric keypad or the

buttons to input
the correct date. Then use the

buttons to switch to
the “Time” field and use the numeric keypad or the

buttons to input the correct time. Then use the

button
to confirm your input.
Main menu - Settings