Kathrein UFS 922 si - Manual (Page 125)

15
After calling up the menu you will see the following
display:
The individual items are selected using the

buttons. If you need to access submenus, they can be
called up using the

button. Changes to the current
settings can be made using the

buttons or
the numeric keypad.
Edit Transponders
Satellite Name
Select here the satellite for which you want to edit/delete
the transponder, or for which you want to add a new
transponder. By pressing the

button at this point
you can view a list of the satellites saved in the receiver.
Use the

buttons to select the satellite you want and
confirm your selection with the

button.
The settings for transponders should be performed by a specialist engineer for the respective
reception system. Only make these settings yourself if you are fully familiar with the particulars of
your reception system.
Frequency
Select here the transponder to be edited/deleted. By
pressing the

button at this point you can view a list
of the transponders saved in the receiver for this satellite.
Use the

buttons to select the transponder you want
and confirm your selection with the

button.
Main menu - Settings