Kathrein UFS 922 si - Manual (Page 30)

0
The individual items are selected using the

buttons. If you require to access submenus, they can be called up using
the

button. Changes to the current settings can be made using the

buttons or the numeric keypad.
Simple LNB
Press the

(green) button.
Connection and setup
The following display appears:
Select Satellite - Tuner 1
Use the

buttons here to select the satellite that is
included in the signal on tuner 1, and press the

button
to confirm your selection.
The selected satellite will be identified with a tick.
When you have completed all settings, press the

(green) button.
The following display appears:
Satellite Configuration - Tuner 1
Here, you make the settings for the satellite for tuner 1.