Kathrein UFS 922 si - Manual (Page 28)

8
Connection and setup
Set Borders
Select the “Set Borders” field. In this menu you can set
the limits for your turntable. This is particularly necessary
if the turntable has only a restricted range in which
it can turn before striking an obstruction (such as a
wall or tree).
Press the

button. The following display appears:
The following buttons allow you to control the movement
of the turntable:

Start slow rotation to the West

Rotate to the West step by step

Stop the current movement

Rotate to the East step by step

Start slow rotation to the East
Once you have reached the desired East/West limit, switch to the respective field “Set current position for “****” border”
and press the

button to confirm.
If you subsequently want to delete the Set Borders, switch to the “Reset border positions” field and press the

button
to confirm deletion of the limits. You can then set new values for the borders. Once you have set all the limits, press the

button.
Press the

(green) button to move to the next menu.