Kathrein UFS 922 si - Manual (Page 147)

147
Set Borders
Select the “Set Borders” field. In this menu you can set
the limits for your turntable. This is particularly necessary
if the turntable has only a restricted range in which
it can turn before striking an obstruction (such as a
wall or tree).
Press the

button. The following display appears:
The following buttons allow you to control the movement
of the turntable:

Start slow rotation to the West

Rotate to the West step by step

Stop the current movement

Rotate to the East step by step

Start slow rotation to the East
Once you have reached the desired East/West limit, switch to the respective field “Set current position for “****” border”
and press the

button to confirm.
If you subsequently want to delete the Set Borders, switch to the “Reset border positions” field and press the

button to
confirm deletion of the limits. You can now set new limits. Once you have set all the limits, press the

button.
Tuner Configuration
Motorized Antenna (DiSEqC™1.3)
Motor Control
Select the control type “DiSEqC™1.3”. For this, refer to
the documentation for your motorized antenna.
My Longitude
Select the “My Longitude” field and use the numeric
keypad to input your actual longitude.
My Latitude
Select the “My Latitude” field and use the numeric keypad
to input your current latitude.
Go to Null Position
Select the “Go to Null Position” field. Press the

button to instruct the turntable to move to its null position.