Kathrein UFS 922 si - Manual (Page 139)

19
Tuner Configuration
DiSEqC™1.0
The individual items are selected using the

buttons. If you require to access submenus, they can be called up
using the

button. Changes to the current settings can be made using the

buttons or the numeric keypad.
Satellite 1
Select “Satellite 1:***” field and press the

button
to allow you to make the settings/selection for the first
satellite.
The following display appears:
Satellite and position:
Select here the satellite you desire from the available
satellites. By pressing the

button at this point you
can view a list of the satellites saved in the receiver.
Use the

buttons to select the satellite you want and
confirm your selection with the

button.
Tuner 1
Select “Tuner 1” field and press the

button to allow
you to make the settings for the first tuner.
The following display appears:
Number of Satellites
State here the number of satellites received in the signal
at tuner 1. A maximum of four satellites can be received
at one tuner.