KVH Industries TracVision G8 - Manual (Page 92)

54-0198 96
TracVision G8 Owner’s Manual - Guide to Technical Information
5.3 TracVision G8 Field
Replaceable Units
If you experience an operating problem or need technical
assistance, please contact your local authorized TracVision G8
dealer/installer or distributor. If one is not located nearby,
contact KVH or KVH Europe directly at the phone, fax, or e-mail
listings on the first page of this manual. Field replaceable units
that can be serviced in the field are listed in Table 5-1.
Table 5-1 TracVision G8 Field Replaceable Units
FRU Part Number
Radome 02-1255
PCB Module 02-1264
RF PCB 02-1342
Master Control Unit (MCU) 02-1265
Azimuth or Elevation Gyro 19-0222
Internal Sensor (with GPS) 02-1266
Azimuth Motor 02-1351
Azimuth Belt 24-0187-0161
Elevation Motor 02-1350
Elevation Belt 24-0105-0137
Skew Motor 19-0110
Skew Belt 24-0124-0144
Standard Circular Dual LNB 02-0870
Standard Circular Dual LNB/Feed Tube Assembly 02-1282-01
DLA Circular Dual LNB Assembly 02-0870-01
DLA Circular Dual LNB/Feed Tube Assembly 02-1282-03
Linear Quad LNB Assembly 02-1323
Linear Quad LNB/Feed Tube Assembly 02-1282-04
Data/power Cable 32-0744-0100
PC Cable 32-0628-06
Receiver Ground Wire 32-0583-50
MCU Fuse 16-0029-15
PCB Module Fuse 16-0029-05
The serial number for your
TracVision G8 will be required
during any troubleshooting or
service calls. You will find the serial
number on the first page of this
manual. (You can also find the
serial number by using the MCU’s
Get Antenna Status mode; see
“Antenna Status Data Screens” on
page 66
for details.)
To help us continually improve the
quality and reliability of our
systems, please return any failed
component to KVH or KVH Europe
(in care of the mailing address
listed on the first page of this
manual) after you receive your
replacement part.