KVH Industries TracVision G8 - Manual (Page 61)

The RETURN and CANCEL Buttons
Throughout the menus, the right-hand button will often be
designated as either RETURN or CANCEL. These options have
the following functions:
• RETURN – Returns to the main menu or display. If no
buttons are pressed within 10 seconds, the menu will
automatically default to the main display.
• CANCEL – Cancels the current action and returns to the
start of the action without making any changes.
Antenna Error Messages
At times, the MCU might display error messages alerting you to
a specific problem (e.g., you have selected an invalid satellite
pair).
“Antenna not responding” (shown in Figure 3-4) indicates that
no messages are being received from the antenna. This is usually
the result of the antenna not being powered up or the antenna
being disconnected from the MCU. This error message might also
appear if the antenna hasn’t completed its limit switch test.
Figure 3-4 Non-responsive Antenna Error Message
Using the MCU Interface
54-0198 61
ERROR: Antenna
not responding