KVH Industries TracVision G8 - Manual (Page 69)

Restarting the Antenna
After resetting satellite parameters, it is necessary to restart the
antenna before the new settings take effect.
Figure 3-12 Restart Antenna Menu
Turning Sleep Mode On/Off
Sleep Mode, if activated, turns off conical scan tracking if the
antenna holds the same position for one minute. As soon as the
vessel moves, the system will automatically begin tracking the
satellite again.
The factory default setting for Sleep Mode is ON for North
American and Latin American systems and OFF for European
systems.
Figure 3-13 Sleep Mode Menu
Using the MCU Interface
54-0198 69
Restart antenna?
Yes Next Return
Antenna Restarted
Proceed to "Turning Sleep Mode
On/Off"
This screen is displayed for 3 seconds
before returning to startup sequence
and main data display
Set sleep On/Off?
Yes Next Return
sLEEP mode: ON
On Return Off The antenna communication setting will
be displayed based on current
selection. ON activates Sleep Mode.
Pushing the ON and OFF buttons will
change the selected setting.
Proceed to "Turning Instant On
Mode On/Off"