KVH Industries TracVision G8 - Manual (Page 129)

54-0198 136
TracVision G8 Owner’s Manual - Guide to Technical Information
D.7 Installation Commands
Set/Report GPS Position
Function: reports or sets default GPS position
Command: GPS
GPS,XX,D,YYY,E
Response: GPS(Default or Active),XX.XX,D,YYY.YY,E,
ZZZZZZ.ZZ
GPS: XXD YYYE
Where: XX.XX = latitude (0-90)
D = S (South) or N (North)
YYY.YY = longitude (0-180)
E = E (East) or W (West)
ZZZZZZ.ZZ = UTC (universal time coordinated) of
position
Report Satellite Names
Function: report names for satellites A and B
Command: SATINSTALL
Response: SATINSTALL,,
Report Configured Satellite Names
Function: report names for all configured satellites
Command: SATLISTA
Response: SATLISTA,,...,
Report Valid Satellite B Selections
Function: report names for all valid satellite B selections for a
given satellite A selection
Command: SATLISTB,
Response: SATLISTB,,
...,
Install Satellite Pair
Function: installs satellites A and B as the satellite pair
Command: SATINSTALL,,
Response: if valid pair, echoes the input data
if invalid pair, returns error message