KVH Industries TracVision G8 - Manual (Page 68)

Manually Controlling the Antenna
In certain circumstances, you may need to control the azimuth,
elevation, and tracking of the TracVision G8 antenna manually,
using the process shown in Figure 3-11. Wait until the antenna
has fully initialized, then use the + and - buttons to manually
move the dish. Azimuth measurements are reported as relative to
the bearing of the vessel’s bow.
Figure 3-11 Manual Antenna Control Procedure
54-0198 68
TracVision G8 Owner’s Manual - Guide to Technical Information
Proceed to "Restarting the
Antenna"
Man control antenna?
Yes Next Return
AZ = XXX.X° EL = XX.X°
- Azimuth +
AZ = XXX.X° EL = XX.X°
- Elevation +
Make antenna track?
Yes No Cancel
YES tells the antenna to begin
actively tracking the set azimuth
and elevation. NO leaves the
antenna halted in its current
position.
If the manual adjustment of the
antenna reached the maximum
rotation (720°), the antenna will
rotate 360° and return to the
Manual Control Antenna screens.
InstantOn Reboot
Please wait
If the system started up in Instant
On mode, the following message
may be displayed:
Wait until the antenna has fully
initialized before making manual
adjustments.