Sharp AR-M257 - Manual (Page 92)

66
MISFEED REMOVAL
When a misfeed occurs during copying, the message "MISFEED HAS OCCURRED." will appear in the touch panel
and printing will stop.
● If the misfed paper tears during removal, remove the torn pieces. Take care not to touch the photoconductive
drum while removing the pieces. Nicks and scratches on the drum will cause dirty copies.
First, locate the misfeed
Misfeed in the RSPF (p.67)
Misfeed in the finisher (p.72)
Misfeed in the machine (p.68)
Misfeed in the bypass tray (p.68)
Misfeed in the upper paper tray (p.70)
Misfeed in the lower paper tray (p.71)
MISFEED REMOVAL GUIDANCE
Misfeed removal guidance can be displayed by touching the [INFORMATION] key on the touch panel after a
misfeed has occurred.
If the fax option is installed, all received faxes are stored in memory. The faxes are automatically printed after the
misfeed is removed.
A MISFEED HAS OCCURRED.
INFORMATION
2
3
4
5
6
1
1
2
3
4
5
6
Note
INFORMATION
!Andromeda_copy_sec.book 66 ページ ２００６年１１月２３日 木曜日 午後６時１分