Sharp AR-M257 - Manual (Page 213)

4 PRINTING FROM MACINTOSH
37 C O N T E N T S
Basic printing
(part 6)
When "Paper Feed" is set to paper tray or paper type
If "Paper Feed" (or "Paper Source" in "General" in Mac OS 9.0 to 9.2.2) is set to paper tray or paper type in the Print window but
there is no paper in the trays that matches your selection, printing will take place as follows:
You selected a tray, but the size of the paper in the selected tray does not match the printing size.
Even though the paper size is different, printing will take place using the paper in the selected tray.
You selected a paper type, and although the selected type of paper is loaded in the machine, its size does
not match the printing size.
Even though the paper size is different, printing will take place using the selected paper type.
However, if "FORCED OUTPUT OF PRINT" is disabled, printing will not take place.
You selected a paper type, but the selected type of paper is not loaded in the machine.
If the bypass tray can be used, a message prompting you to print from the bypass tray will appear. Press the [PRINT] key on the
operation panel, touch the [BYPASS TRAY] key, load the correct size and type of paper in the bypass tray, and then touch the
[BYPASS] key. Printing will begin automatically.
The size and type of paper loaded in each tray and whether or not the paper loaded in each tray can be used for printing are
specified in the "TRAY SETTINGS" of the custom settings. (See "CUSTOM SETTINGS" in the operation manual for copier.