Sharp AR-M257 - Manual (Page 131)

1
INTRODUCTION
The network scanner expansion Kit enables the machine to be used as a network scanner.
* Memory can be added by installing a commercially available 128 MB or 256 MB memory module (144-pin SDRAM
SODIMM). For more information, consult your dealer.
● This manual only explains features that can be used when the Network Scanner Expansion Kit is installed. For
information on loading paper, replacing toner cartridges, clearing paper misfeeds, handling peripheral devices,
and other copier-related information, please refer to your operation manual for copier.
● The explanations in this manual assume that the person who will install the product and the users of the product
have a working knowledge of Microsoft Windows.
● In this manual, American spellings are used.
● For information on the operating system, please refer to your operating system manual or the online Help function.
● The explanations of screens and procedures in this manual are for Windows XP. The screens may vary
depending on your Windows version and settings.
● This manual refers to the Reversing single pass feeder as the "RSPF".
• To enable the network scanner function of this machine, a product key (password) must be entered using a key
operator program. This is only required once. Use the "PRODUCT KEY" program to enter the product key. If you
do not know your product key, please ask your dealer. (For information on using key operator programs, refer to
key operator's guide.)
• The printer expansion kit (AR-P17) and at least 128 MB of memory* are required to use the network scanner
function.
• The procedure for installing the software programs that are contained in the "Network Scanner Utilities"
CD-ROM (included in the network scanner expansion kit) is explained on page 37 of this manual.
For the procedures for using the software programs, see the user's guides on the CD-ROM. (p.39)
!Andromeda-NS_Sec.book 1 ページ ２００６年１１月２７日 月曜日 午後５時１０分