Sharp AR-M257 - Manual (Page 37)

11
BEFORE USING THE MACHINE
1
TOUCH PANEL
Using the touch panel
[Example 1]
Items on the touch panel
are selected by touching
the key associated with
the item. A beep will
sound to confirm that the
item was selected and
the key will be
highlighted.
* A double-beep is
sounded when an
invalid key is touched.
[Example 2]
Keys which are grayed
out cannot be selected.
The confirmation beeps can be disabled in the key
operator programs. (See "Key operator's guide".)
The touch panel screens shown in this manual are
printed images and may differ from the actual screens.
Selecting a function
[Example 1]
Items which are
highlighted at the time a
screen appears are
already selected and will
take effect when the [OK]
key is touched.
[Example 2]
If you need to cancel a selection, simply press the key
once again so that it is not highlighted.
The key is no longer
highlighted and the
selection is canceled.
[Example 3]
When the machine is
used in copy mode or fax
mode and a special
mode is selected, a icon
representing the feature
will appear on the touch
panel. If this icon is
touched, the setting
screen of the function (or
a menu screen) will
appear, allowing the
settings to be checked,
adjusted, or canceled.
JOB QUEUE
COPY
SHARP001
003 / 000
003 / 000
SETS / PROG
Beep
tone
1/13 COMPLETE
CANCEL
RIGHT
BINDING
LEFT
BINDING
OK
MULTI SHOT
1/ DUAL PAGE
COPY
MULTI SHOT
1/ DUAL PAGE
COPY
SPECIAL MODES
OUTPUT
2-SIDED COPY
READY TO COPY.
ORIGINA
8½x11
8½x14
!Andromeda_copy_sec.book 11 ページ ２００６年１１月２３日 木曜日 午後６時１分