Sharp AR-M257 - Manual (Page 103)

77
5
CLEANING THE MACHINE
DOCUMENT GLASS AND RSPF
If the document glass, RSPF, or scanning glass for originals fed from the RSPF (the long narrow glass surface on
the right side of the document glass) become dirty, the dirt may appear on copies. Always keep these parts clean.
Stains or dirt on the document glass/RSPF will also be copied. Wipe the document glass, the RSPF and the
scanning window on the document glass with a soft, clean cloth.
If necessary, dampen the cloth with water. Do not use thinner, benzene, or similar volatile cleaning agents.
THE BYPASS TRAY PAPER FEED ROLLER
If misfeeds occur frequently when feeding envelopes or other thick paper from the bypass tray, wipe the paper feed
roller at the feed slot of the bypass tray with a soft, clean cloth moistened with alcohol or water.
Do not spray flammable cleaner gas. Gas from the spray may come in contact with the internal
electrical components or high-temperature parts of the fusing unit, creating a risk of fire or
electrical shock.
Surface of document glass Underside of RSPF
Scanning glass
Warning
Scanning glass for RSPF
Bypass tray paper feed roller
!Andromeda_copy_sec.book 77 ページ ２００６年１１月２３日 木曜日 午後６時１分