Sharp AR-M257 - Manual (Page 41)

15
1
LOADING PAPER
When a tray runs out of paper, a message appears in the touch panel. Load paper in the tray.
PAPER
The specifications for the types and sizes of paper that can be loaded in the paper trays are shown below.
For best results, use only SHARP recommended paper.
* 1 5-1/2" x 8-1/2" (A5) size paper can only be loaded in tray 1 and the bypass tray.
* 2 B5 size paper cannot be loaded in tray 2 (However, B5R paper can be loaded.).
* 3 When loading paper larger than 8-1/2" x 11" (A4) size, do not use paper of weight greater than 28 lbs. (105 g/m 2 ) .
* 4 The number of sheets of paper which can be loaded varies depending on the weight of the paper.
Tray
No.
Paper tray type Paper type Size Weight Capacity
1 Upper paper tray *1 Plain paper
Letterhead paper
Recycled paper
Color paper 5-1/2" x 8-1/2" to
11" x 17"
(A5 to A3) 15 lbs. to 28 lbs.
(56 g/m
2 to 105 g/m 2 )
500 sheets* 4
2 Lower paper tray *2
3 500-sheet paper
feed unit/
Upper paper tray of
2 x 500-sheet paper
feed unit
4 Lower paper tray of
2 x 500-sheet paper
feed unit
Bypass tray Plain paper
Letterhead paper
Recycled paper
Color paper 5-1/2" x 8-1/2" to
11" x 17"
(A6 to A3) 15 lbs. to 34.5 lbs.
(56 g/m
2 to 128 g/m 2 ) *3
100 sheets* 4
Thin paper 14 lbs. to 15 lbs.
(52 g/m
2 to 56 g/m 2 )
100 sheets
Heavy paper Max. 54 lbs.
(200 g/m
2 )
30 sheets
Labels 40 sheets
Transparency film 40 sheets
Envelope International DL
(110 x 220 mm)
International C5
(162 x 229 mm)
Commercial 10
(4-1/8" x 9-1/2") 5 sheets
2-SIDED COPY
SPECIAL MODES
OUTPUT
OPEN TRAY 1 AND ADD PAPER.
AUTO
EXPOSURE
AUTO 8½x11
PAPER SELECT
100%
COPY RATIO
8½x11 ORIGINAL
0
8½x11
8½x14
!Andromeda_copy_sec.book 15 ページ ２００６年１１月２３日 木曜日 午後６時１分