Sharp AR-M257 - Manual (Page 54)

28
COPY FUNCTIONS
5 Make sure that a suitable paper size is
automatically selected, or select
another size using the [PAPER
SELECT] key.
6 Select the number of copies and any
other desired copy settings, and then
press the [START] key (
).
The original for the front
side is scanned.
7 Remove the first original and then place
the original for the back side on the
document glass. Close the RSPF and
then press the [START] key (
).
To cancel automatic
two-sided copying, press
the [CLEAR] key (
).
USING THE RSPF
1 Place the original(s) in the document
feeder tray. (p.23)
2 Touch the [2-SIDED COPY] key.
3 Touch the desired copy mode.
4 Touch the [OK] key.
5 Make sure that a suitable paper size is
automatically selected, or select
another size using the [PAPER
SELECT] key.
6 Select the number of copies and any
other desired copy settings, and then
press the [START] key (
).
EXPOSURE
AUTO 8½x11
PAPER SELECT
100%
ACC.#-C
When making two-sided copies of an odd
number of originals, touch the [READ-END]
key after scanning the last original.
Note
OUTPUT
2-SIDED COPY
D COPY
BIN
CHA
Y TO COPY.
Portrait-oriented original
(11" x 17" or 8-1/2" x 14" size)
Before [BINDING CHANGE] After [BINDING CHANGE]
Touch the [BINDING CHANGE] key when making the
tablet binding, or when making automatic two-sided copies
of a one-sided 11" x 17" or 8-1/2" x 14" size portrait
original, touch the [BINDING CHANGE] key.
BINDING
CHANGE
OK
EXPOSURE
AUTO 8½x11
PAPER SELECT
100%
ACC.#-C
!Andromeda_copy_sec.book 28 ページ ２００６年１１月２３日 木曜日 午後６時１分