Settings, Total count, Display contrast – Sharp AR-M257 User Manual
Page 81: List print, Clock, Tray settings, Keyboard select
55
USER SETTINGS
4
SETTINGS
Total count
The total page count display shows the following
counts:
• The total count shows the combined output total of
the copy, fax, and printer functions.
• Total number of copies and printed pages
• Number of pages fed through the RSPF
• Number of two-sided copies
• Number of times the stapler was used
• Number of pages sent using the network scanner
function
• Number of sent and received fax pages
The counts that appear will vary depending on the
peripheral equipment installed.
• Each sheet of paper that is 11" x 17" (A3) size is
counted as two sheets.
• Each sheet of paper used for automatic two-sided
copying is counted as two sheets (11" x 17" (A3)
paper is counted as four sheets.).
Display contrast
Screen contrast adjustment is used to make the touch
panel easier to view under various lighting conditions.
Touch the [LIGHTER] key to make the screen lighter,
or the [DARKER] key to make the screen darker.
List print
Use this to print the PRINTER TEST PAGE, the FAX
REPORT, or the SENDING ADDRESS LIST.
Clock
Use this to set the date and time of the machine’s
built-in clock. The date and time are used for functions
that require date and time information.
Tray settings
The paper type, paper size, and enabled modes can
be set for each tray. Auto tray switching and disabling
of two-sided printing on letterhead paper can also be
set. See page 19 and 20 for details on setting the
paper type and paper size.
• To select which trays can be used in each of copy,
printer, and fax modes, select the checkboxes (
)
of the desired trays in each mode.
• When a tray runs out of paper in the middle of a job,
the auto tray switching function automatically
switches the paper source to another tray that has
the same paper size and paper type settings. (The
auto tray switching function cannot be set for the
bypass tray.)
Keyboard select
When using the fax or network scanner function, you
can change the layout of the keyboard that appears in
the letter entry screen. Select the layout that you find
easiest to use.
The following three keyboard configurations are
available:
• Keyboard 1 (QWERTY configuration)*
• Keyboard 2 (AZERTY configuration)
• Keyboard 3 (ABCDEF configuration)
*
The default setting is "Keyboard 1".
(Example: Letter entry screen when Keyboard 3 is
selected.)
NAME
SPACE
AB/ab
12#$
OK
CANCEL
ABC
abc
АДВ/адв
a
a
c
d
g
h
i
j
k
l
m
n
o
p
q
t
u
v
w
x
y
z
r
s
@
f
e
b
!Andromeda_copy_sec.book 55 ページ ２００６年１１月２３日 木曜日 午後６時１分