Sharp AR-M257 - Manual (Page 212)

4 PRINTING FROM MACINTOSH
36 C O N T E N T S
Basic printing
(part 5)
When "Paper Feed" is set to "Auto Select"
If "Paper Feed" is set to "Auto Select" in the Print window and
the correct size of paper is not loaded in the machine, the
printing method will vary depending on the "FORCED OUTPUT
OF PRINT" setting in the key operator programs (see the key
operator's guide). When "FORCED OUTPUT OF PRINT" is disabled
If the bypass tray can be used, a message prompting you to
print from the bypass tray will appear in the touch panel.
Press the [PRINT] key on the operation panel, touch the
[BYPASS TRAY] key, load paper in the bypass tray, and then
touch the [BYPASS] key. Printing will begin automatically.
When "FORCED OUTPUT OF PRINT" is enabled
Printing will take place using a size of paper that is close to the
size of the print image.
If the paper is loaded in a different orientation than the
print image, the image is automatically rotated to match
the paper. This setting can be changed in the key
operator programs (see "ROTATED PRINT" in the key
operator's guide).
Note