Sharp AR-M257 - Manual (Page 16)

14
GENERAL PROGRAMS
KEY OPERATOR CODE
CHANGE
This program is used to change the key operator code
that must be entered to configure the key operator
programs. When the machine is first used, the key
operator (adminstrator of the machine) should change
the key operator code that was set at the factory to the
desired 5-digit code. (A number that has been
programmed as an account number cannot be used.)
Only one key operator code can be programmed.
The factory default setting for the key operator code is
00000 .
PRODUCT KEY
(When the PRINTER
EXPANSION KIT is installed)
Use these programs to enter the product keys for the
following options.
PS3 EXPANSION KIT
(When the PRINTER EXPANSION KIT is
installed)
This program is used to enter the product key that
enables the machine to be used as a PostScript
printer. Ask your dealer for the product key.
NETWORK SCANNER EXPANSION KIT
(When the PRINTER EXPANSION KIT and
EXPANSION MEMORY are installed)
This program is used to enter the product key for the
network scanner function. Ask your dealer for the
product key.
E-MAIL ALERT AND STATUS
(When the PRINTER EXPANSION KIT is
installed)
This program is used to enter the product key for
E-MAIL ALERT AND STATUS, which enables
customer product support via a network system. Ask
your dealer for the product key.
SERIAL NUMBER
Use this program to display the serial number of the
machine. The serial number is required when
obtaining product keys for PS3 EXPANSION KIT,
NETWORK SCANNER EXPANSION KIT and the
E-MAIL ALERT AND STATUS.
KEY OPERATOR PROGRAMS
PRODUCT KEY
PS3 EXPANSION KIT
E-MAIL ALERT AND STATUS
NETWORK SCANNER EXPANSION KIT
SERIAL NUMBER
OK
AR-M237_keyope_SEC.book 14 ページ ２００６年１１月２０日 月曜日 午後６時３１分