Sharp AR-M257 - Manual (Page 11)

9
GENERAL PROGRAMS
ACCOUNT NUMBER CONTROL
This program is used to store, delete, and change
account numbers for AUDITING MODE. A maximum
of 100 account numbers can be stored.
● Storing a new account number
To store a new account number, touch the [ENTER]
key and then use the numeric keys to enter a 5-digit
account number. Touch the [ENTER] key to store
the number. After storing the account number, you
can continue storing other account numbers.
Note that the same number as the key operator
code cannot be stored.
● Deleting an account number
To delete an account number, touch the [DELETE]
key and then select whether you wish to delete a
single account number or all account numbers.
To delete a single account number, use the numeric
keys to enter the account number that you wish to
delete and then touch the [ENTER] key.
To delete all account numbers, touch the [DELETE]
key and then touch [YES] in the screen that appears
to confirm the deletion.
● Changing an account number
To change an account number, touch the
[CHANGE] key and use the numeric keys to enter
the account number that you wish to change. Enter
the new account number and then touch the
[ENTER] key. After changing the account number,
you can continue changing other account numbers.
If you make a mistake while entering the account
number that you wish to change and enter a number
that is not in use, an alarm will sound and the display
will change to hyphens (-).
ACCOUNT LIMIT SETTING
A limit for the number of copies that can be made can
be set for a single account or for all accounts at once.
The maximum limit that can be entered is 999,999.
Touch the [ACCOUNT LIMIT SETTING] key to display
the account limit setting screen.
● Setting a limit for a single account
Use the numeric keys to enter the number of the
account for which you wish to set a limit, and then
enter the limit. When finished, touch the [ENTER]
key.
If you enter an account number that already has a
limit, the limit will appear in the display. To change
the limit, press the [CLEAR] key (
) (the display
will change to hyphens (-)) and then enter the new
limit.
If you touch the [ENTER] key while the display
shows hyphens (-) for the limit, the limit set for the
account will be canceled. When you have finished
setting a limit for one account, you can continue
setting limits for other accounts.
When finished, touch the [OK] key to exit.
● Setting a limit for all accounts
Touch the [LIMIT] key. [ALL] will appear in the
account number entry screen.
Enter a limit for all acounts in the same way as
explained above for a single account.
When finished, touch the [OK] key to exit.
ACCOUNT NUMBER SECURITY
This program is used to display an alarm and prohibit
entry of account numbers for one minute if an incorrect
acount number is entered three times in a row when
"AUDITING MODE" is enabled. (This prevents
unauthorized people from attempting to guess an
account number.)
This program is initially disabled (factory default setting).
CANCEL JOBS OF INVALID ACCOUNTS
This program is used to control use of the printer
function when "AUDITING MODE" is enabled. When
this program is enabled, the machine will not print a
print job if the operator enters an invalid account
number at the computer or fails to enter an account
number.
When the program is disabled, print jobs received
without the entry of a valid account number will be
printed and the number of pages will be included in the
[OTHERS] count.
This program is initially disabled (factory default setting).
KEY OPERATOR PROGRAMS
INPUT ACCOUNT NUMBER TO BE LIMITED.
OK ACCOUNT LIMIT SETTING
ACCOUNT
NUMBER MAXIMUM
----- ---,--- 123,456
LIMIT ENTER
NUMBER OF
COPIES MADE
AR-M237_keyope_SEC.book 9 ページ ２００６年１１月２０日 月曜日 午後６時３１分