Sharp AR-M257 - Manual (Page 145)

15
BEFORE USING THE NETWORK SCANNER FUNCTION
1
STORING THE SENDER INFORMATION (Scan to E-mail)
Use this procedure to store the sender information (sender name and e-mail address) that appears when you send
an image by Scan to E-mail. Up to 200 senders can be stored (only one sender can be selected for a transmission).
The sender name appears in the recipient's e-mail program.
1 Click "Sender" in the menu frame.
2 Click "Add".
The sender programming
screen appears.
3 Enter the sender information.
For detailed explanations of the procedures for
establishing settings, click "Help" in the menu
frame.
If user authentication is enabled and you wish to
allow login using the above stored information,
enter the login name for that information in "Login
Name" (maximum of 32 characters). The login
name must be the same as the login name stored
in the LDAP server.
4 When you have completed all of the
entries, click "Submit".
The entries will be stored.
Editing and deleting programmed sender's information
1 Click "Sender" in the menu frame. 2 Click "Edit" or "Delete".
If you clicked "Edit", edit
the information in the
same way that you
initially programmed it
and then click "Add" to
save your changes. If
you clicked "Delete", a
message will appear
asking you to confirm the
deletion. Click "Yes" to
delete.
!Andromeda-NS_Sec.book 15 ページ ２００６年１１月２７日 月曜日 午後５時１０分