Siemens 2015 - Manual (Page 71)

Operation with several base stations
62
Gigaset 2015 plus, GBR: A30852-X-1105-B301-1-7619 kap15.fm5 29.10.99
Setting a priority station
If the handset is located in the area where two or more
base station radio ranges are overlapping, it is recom-
mended that you select a priority base station. This pre-
vents the station being switched automatically. You can
then only be contacted via the manually selected station.
Select the best station if the priority station is not accessible
If you have set a priority base station, your handset
searches for approximately 30 seconds for the priority
station when switching to the radio range of another base
station. Then it searches for the best station available at
the moment.
B
I Start the procedure. The numbers of the base stations at
which the handset is logged on are displayed:
o B Enter the number of the priority base station and save
with B .
B I
Start the procedure. The numbers of the base stations at
which the handset is logged on are displayed:
o o B Enter twice the number of the base station to be
searched for first, then s
ave with B .