Siemens 2015 - Manual (Page 47)

Barring functions on the Gigaset 2015 plus
38
Gigaset 2015 plus, GBR: A30852-X-1105-B301-1-7619 kap10.fm5 29.10.99
Barred codes for handsets
For each registered handset you can store individually de-
fined external numbers or groups of numbers which can-
not be dialled when the barred code function (➔ page 39)
is activated. For example, you can bar numbers beginning
with 00 or special-tariff numbers.
For each registered handset you can store up to 3 barred
codes. These numbers can each consist of up to 8 digits.
Displaying or storing barred codes
B
# 8 5
Start the procedure.
o
Enter the 4-digit system code (default: “0000”)
(➔ page 19). The registered handsets or their internal call
numbers are shown on the display:
:
o
Enter the internal number of the required handset
(1 to 6).
O Select the first barred code for the handset in
question. The barred code is displayed:
:
:
O Display the next barred code.
or
o
Enter the barred code for the memory location indicated
(1 to 3). If a barred code is already stored, the old number
is overwritten with the new number.
O Display the next emergency number. Any barred codes
entered are marked for storage.
or
B Terminate the process: store all inputs.
1 2 3
P f
N
b
(Example: handsets
1, 2 and 3 are logged on)
1 z
P f
N
b
(1st example: no barred
code stored)
1 00
P f
N
b
((2nd example: barred
code 00 is stored)
You cannot use this facility until the barring
function has been activated.