Siemens 2015 - Manual (Page 27)

Important basic settings
18
Gigaset 2015 plus, GBR: A30852-X-1105-B301-1-7619 kap07.fm5 29.10.99
Trunk codes
If you operate your Gigaset 2015 plus in conjunction with
a PBX (telecommunications system), you can set the fol-
lowing for switching to the public telephone network:
● the trunk code
● the length of the pause following the trunk code (if a
dial pause is required after the trunk code has been
entered).
If the PBX is a satellite to a main PBX, you can set the
following:
● the trunk code
● the main trunk code
● the length of the pause following the trunk code/main
trunk code
Entering trunk code/main trunk code
The trunk codes/main trunk codes consist of 1, 2 or 3 dig-
its and can consist of digits
0 to 9 and keys : , #
and R .
For details of the trunk code/main trunk code
and the length of pause please refer to the PBX
documentation.
B
# 0 Start the procedure.
o
Enter the 4-digit system code (default: “0000”)
(➔ page 19).
O
Select the trunk code.
or
OO Select the main trunk code.
o
Enter the trunk code/main trunk code. If there are several
codes, you can press
O again to enter the next code.
B
Store the setting.