Siemens 2015 - Manual (Page 36)

Individual settings on the base station
27
Gigaset 2015 plus, GBR: A30852-X-1105-B301-1-7619 kap08.fm5 29.10.99
Individual settings on the base station
You can configure your Gigaset 2015 plus individually.
The settings can be made from a registered handset.
Switching off base station tone ringing or setting volume of tone ringing
You can specify whether tone ringing is heard at the base
station or only at the handset. If tone ringing is to be au-
dible at the base station, you can set the volume as
required.
There are seven levels:
The default setting is Level 6 (loud).
Setting pitch of base station tone ringing
You can set the pitch of the tone signals at the base sta-
tion. The pitch can be set to one of 6 levels. The default
setting is 1.
Level 0 = No tone ringing at the base
station. Calls are only signalled
at the handset.
Level 1 ... Level 6 = Volume range from quiet to loud.
The volume of the tone ringing at the handset
can also be set (➔ page 29).
B # * 5 Start the procedure. The tone ringing which has been set
is heard; the volume which has been set is indicated:
:
o B Press the digit for the level required (1 to 6) or 0 for “Tone
ringing off” and store.
n5 6
P f
N
b
(Example: volume level 6
has been set)
In order to adjust the pitch, the tone ringing
should be switched on at the base station.
It is advisable to have distinctive ringing signals
for the base station and the handsets. The pitch
of the tone ringing at the handset can also be
set (➔ page 29).