Siemens 2015 - Manual (Page 13)

Putting the equipment into operation - step by step
4
Gigaset 2015 plus, GBR: A30852-X-1105-B301-1-7619 kap02.fm5 29.10.99
6th step: setting the day of the week and the time
Each new message is annotated with the day and the
time at which it arrived (time stamp function of the an-
swering machine).
When the base station is connected up to the power sup-
ply or power failure, you will hear the message: “Time set-
ting not available” when you switch on the answering ma-
chine.
You will be guided through the procedure for setting the
time by means of announcements over the loudspeaker
at the base station.
B
# I 99 Start the procedure.
The following is output as a check: “Time setting“. You
are then prompted to enter the current day.
1
to
7 Enter digit for the week:
1 = Monday, 2 = Tuesday, 3 = Wednesday,
4 = Thursday, 5 = Friday, 6 = Saturday, 7 = Sunday.
You are then prompted to enter the current time.
0000 Enter the time using four digits, e.g. 0937 for 9.37 hours.
to
2359
B
Store settings.