Siemens 2015 - Manual (Page 41)

Individual settings on the Gigaset 2000S handset
32
Gigaset 2015 plus, GBR: A30852-X-1105-B301-1-7619 kap08.fm5 29.10.99
Activating/deactivating synchronisation tone
When synchronisation tone is activated, a signal is issued
if the handset was too far from the base station and has
returned within range. The synchronisation tone can be
activated (status 1) or deactivated (status 0, default set-
ting).
Activating/deactivating automatic call acceptance
When automatic call acceptance is activated, you are
connected to the calling party as soon as you remove
the handset from the charger unit. Automatic call
acceptance can be activated (status 1, default setting)
or deactivated (status 0).
Speed dialling numbers
You can store speed dialling numbers for frequently re-
quired external numbers. These speed dialling codes can
then be used for calling outside numbers (➔ page 8).
B 3 5
Start the procedure. The current setting is displayed:
35 1 = activated, 35 0 = deactivated.
1 B Activate synchronisation tone.
or
0
B Deactivate synchronisation tone.
B 3 8
Start the procedure. The current setting is displayed:
38 1 = activated, 38 0 = deactivated.
1 B Activate automatic call acceptance.
or
0
B Deactivate automatic call acceptance.
A total of 10 speed dialling numbers can be
stored.
The stored external number can consist of a
maximum of 22 characters, i.e. digits or the star,
square, PBX recall and redial keys (manual
dialling pause).
You can also administer speed dialling numbers
in the course of a call.