Siemens 2015 User Manual
Page 61
The answering machine
52
Gigaset 2015 plus, GBR: A30852-X-1105-B301-1-7619
kap12.fm5
29.10.99
Initiating remote operation
In order to operate the answering machine remotely, you
must first activate the remote function.
From the handset
From another telephone with DTMF-capability
I
9
Press the keys on the handset in order to call the
answering machine. This results in output of a “ready
tone”, the mode of operation, the current number of
messages in storage, and (if applicable) the day and
the time.
Y
You call your own number from a remote station. If the
DID function is activated, you hear a high multiple tone.
The answering machine switches on after 5 seconds.
#
o
After the message, press the pound key and enter the
system code via the telephone’s dialling keypad. For
checking purposes, the telephone outputs a stand-by
tone, the operating mode, the current number of mes-
sages saved as well as the relevant weekday and time.
If you enter the incorrect system code, the an-
nouncement "Faulty PIN" is output at the tele-
phone. You can then re-enter the system code.
The connection is automatically cleared down
after the third incorrect attempt.
Remote operation and DID from another tele-
phone are only possible if a system code which
is different from the default system code has
been programmed (➔ page 19).
Remote operation is still possible even if the an-
swering machine has been switched off. In this
case you simply continue ringing until the an-
swering machine responds.